Common Questions


Clear Tape


Packaging Tape and Supplies


Laminating

  • A pouch is stuck in my Thermal Laminating machine. What should I do?
    First, unplug the device. With the pouch release lever held down, try gently pulling the pouch back out of the laminator. Do not pull the pouch through the machine. If this doesn’t work, please call the 3M Laminating Help Line at 1-800-772-4337 or contact us online.
  • How do I get the best results when laminating?
    You’ll get the best results when you give the laminating machine the time it requires to warm up. (From one minute to less than six minutes, depending on the model. Please refer to the instructions for your specific model).
  • Which heat setting should I use for my projects?
    With Scotch™ Thermal Laminating Pouches - letter, legal, and menu size use 3mil heat setting. For most other smaller thermal pouch sizes, use the 5 or 6 mil setting. If in doubt, start with a lower heat setting and work your way up if laminating quality is not good.
  • Can I laminate multiple items in one pouch?
    Yes! Laminating smaller items together is a great way to save time. Here’s how:
    Step 1: Place items—such as flash cards, ID cards or recipes—into one Thermal Pouch. Place items in the Pouch with minimum of ½ inch of space between them to allow room for trimming items upon completion.
    Step 2: Send the Thermal Pouch through the Thermal Laminator, sealed edge first, then allow it to cool on a flat surface.
    Step 3: Hand trim around the thermal laminated items. Scotch™ Thermal Laminating Pouches completely seal around your document, meaning there are no air pockets or gaps when you trim.
    NEVER cut a pouch before laminating or it will jam inside the machine.
    NEVER laminate Social Security cards, or one-of-a-kind items that cannot be replaced.
  • Can I cut a pouch before laminating?
    No. NEVER cut a pouch before laminating or it will jam inside the machine.
  • What type of thermal pouches can I use in my machine?
    For best results, use Scotch™ Thermal Laminating Pouches in your thermal laminating machine.
    • Model TL901: 3 mil, 5 mil pouches up to 9” wide
    • Model TL902: 3 mil, 5 mil pouches up to 9” wide
    • Model PRO TL906: 3 mil, 5 mil pouches up to 9” wide
    • Model TL1302: 3 mil, 5 mil, 6 mil pouches up to 12.3” wide
    • Model PRO TL1306: 3 mil, 5 mil, 6 mil pouches up to 12.3” wide
  • Can I cut documents after I’ve laminated them?
    Yes! Always laminate your Thermal Pouch first, let it cool, and then trim.
  • Can I write/erase dry erase marks on laminated documents?
    Yes! That’s one of the beauties of laminating. In fact dry erase markers work great – they’re easy to wipe off so laminated items can be used repeatedly.
  • Can I laminate my social security card?
    No. Items not intended for use with any laminator include: currency, Social Security cards, stamps, credit cards, or cards with a magnetic strip. Some of these items incorporate important authentication features that are hampered by lamination.

    Also, do not laminate sharp objects, unheatable plastic, historically significant papers or one-of-a-kind items.
  • How long does it take for the thermal machine to heat up?
    Different laminators take different amounts of time to heat up
    • The Scotch™ Thermal Laminator TL901 Laminator takes 5-7 Minutes.
    • The Scotch™ Thermal Laminator TL902A takes 5-6 minutes.
    • The Scotch™ Advanced Thermal Laminator TL1302 takes 1 minute.
    • The Scotch™ Pro Thermal Laminator TL906 takes 5-6 minutes.
    • The Scotch™ Pro Thermal Laminator TL 1306 takes 1 minute.

Glue

  • How much glue should I use?
    It depends on what glue you’re using, and what your project is. For all glues (except super glue), apply a thin, uniform layer that completely covers the surface area to be glued. Apply Super glue sparingly. A good rule of thumb for super glue is to apply one small drop for each square inch of surface to be glued.
  • What’s the difference between Super Glue and Multi-Purpose Glue?
    Both Scotch® Super Glues and Scotch® Multipurpose Glue bond many substrates, but the super glue dries much quicker. Generally, Scotch® Super Glues are stronger than Scotch® Multipurpose glue, but not in all cases. Multi-purpose Glue is ideal for use on paper, poster board, cardboard, wood, fabric, metal, aluminum, formica, vinyl, PVC and acrylic. Superglue is commonly used for gluing wood, metal, leather, ceramic, rubber, some plastics and similar materials. Super glue is usually not a good choice for paper.
  • What do I do if my fingers get stuck?
    Don’t panic! Try gently working vegetable oil or baby oil around the edges and into the glued area to loosen the skin. Alternatively, try soaking fingers in warm, soapy water. Be very gentle - do not pull skin surfaces apart with a direct opposing action as skin damage may result. If unable to free bonded area, or if irritation persists, get medical attention.
  • What should I do if I get super glue on my clothes, my furniture/workspace, etc.
    Try gently working vegetable oil or baby oil around the edges and into the glued area to loosen the bond. Alternatively, try soaking the glued area in warm, soapy water.
  • How should I prepare a surface before gluing?
    Make sure the surface is clean, dry and free of debris. For smooth, hard surfaces, use sandpaper or steel wool to gently roughen the surface before gluing to get a stronger bond.
  • What glue is best for plastic repair?
    Scotch® Maximum Strength Adhesive and Scotch® Ultra Strength Adhesive work on the widest variety of plastics.
  • What can I do if I have a clogged dispenser?
    For water based glues, soak the nozzle in warm water and then pierce the clog with a paper clip or sewing needle.
  • How can I prevent glues from drying out during storage in between use?
    The best thing to do is simply seal the cap tightly.
  • How do I remove glue from my hands after use?
    Try gently working vegetable oil or baby oil around the edges of the dried glue. Alternatively, try soaking fingers in warm, soapy water. Be very gentle - do not pull glued skin surfaces apart with a direct opposing action as skin damage may result.

Scissors


Dispensers


Wardrobe


Mounting

  • Is there an ideal application temperature?
    For all Scotch® Mounting Tapes, ideal application temperature is 70-100 °F (21-28 °C). Most tapes can be successfully applied above 50° F.
  • Are they waterproof or weatherproof?
    Scotch® Outdoor Mounting and Extremely Strong Mounting Tapes can be used for bonding and sealing applications, where water cannot penetrate through them. Scotch® Clear, Outdoor and Extremely Strong Mounting Tapes have UV-resistant adhesives so they hold up under UV exposure.
  • What surfaces will mounting tapes stick to?
    Scotch® Indoor Mounting Tape: works on most indoor surfaces that are dry, clean and smooth. Scotch® Outdoor Mounting Tape: works on many surfaces including metal, glass, finished and painted wood, vinyl and plastic. Scotch® Extreme Mounting Tape: works on many finished surfaces such as finished and painted wood, metal, laminate and tile. None of the mounting tapes are recommended for use on wallpaper or delicate surfaces. See packages for details.
  • Can you exceed the weight limits by applying more tape?
    Due to safety concerns, it is not recommended to exceed the weight limits for Scotch® Mounting Tapes.
  • Will mounting tape damage paint or sidings (or any other materials)?
    Mounting Tape is meant to be permanent, and removal may damage surfaces.
  • How thick is this tape?
    Mounting Tapes come in a variety of thicknesses around 0.045 inches.

Fasteners

Follow Scotch® Brand
3M, Scotch, Magic and the Plaid Design are trademarks of 3M.